检查井适用范围 |
添加时间:2019/6/18 13:29:53 浏览次数: |
检查井适用范围 Scope of application of inspection wells 1)建筑小区(居住区、公共建筑区、厂区等)、城乡市政、工业园区、旧城改造等范围内埋地排水管道外径不大于1200mm、埋设深度不大于8m的塑料排水检查井工程的设计、施工和维护保养。 1) Design, construction and maintenance of plastic drainage inspection wells with a diameter of less www.yuanlingujian.com.cn www.aoyou56.com www.huaruizh.com www.aoyouwangluo.com www.fangzhuangmoju.cn www.dangtuqiang.com.cnthan 1200 mm and a depth of less than 8 m in residential areas (residential areas, public buildings, factories, etc.), urban and rural municipal administration, industrial parks and old city renovation. 2)一般土质、软土土质、季节性冻土土质和湿陷性黄土土质条件下的塑料排水检查井施工; 2) Construction of plastic drainage inspection wells in general soil, soft soil, seasonal frozen soil and collapsible loess; 3)抗震设防裂度为9度及9度以下的地区。 3) Seismic fortification in areas with crack resistance of 9 degrees and less than 9 degrees. 4)一般车道的地面荷载按汽车总重15t(后轮压5t);消防车道的地面荷载按汽车总重30t(后轮压6t)设计。 4) Ground load of general lane is 15 t (rear wheel pressure 5 t) and that of fire lane is 30 t (rear wheel pressure 6 t). 5)地下水位按地面下不高于1.0m设计; 5) The groundwater level is not higher than 1.0 m below the ground. |
上一页 塑料一体注塑检查井 |
下一页 模具是怎样做成的 |
Copyright © 技术支持:遨游网络